In the production process of tempered glass, the state of the small tempering furnace is closely related to the quality of the product. Often customers purchase the tempering furnace equipment because of the fault of the control system or the failure of the protection in time, which leads to serious accidents in the tempering furnace and the tempered products produced.

　　What are the protection methods of small tempering furnace

　　In fact, no matter what kind of product it is, as long as the equipment is in good operating condition, high-quality products can be produced. Therefore, whether it is general equipment or small tempering furnace equipment, daily protection is necessary. In case it affects its service life!

　　When the tempered glass has poor optical effect or explodes, the small tempering furnace should be stopped to cool down in time. Deal with the situation as follows.

　　The appearance of the ceramic roller of the small tempering furnace is rough:

　　Cause: Small pieces of glass or other materials are inlaid or adhered to the ceramics.

　　Processing process:

　　1. Use a spatula to gently chop and scrape off the broken glass or other foreign objects embedded in the ceramic roller

　　2. Use a plastic brush to clear the attachments on the surface of the ceramic roller, and attach it with a vacuum cleaner.

　　3. Use 400-600 fine corundum water sandpaper to polish the rotating porcelain stick until the porcelain stick is smooth and smooth.

　　4. Use a vacuum cleaner to quickly absorb the dust on the surface of the porcelain roller of the small tempering furnace

　　5. Use a clean soft white cloth to moisten the softened water and wipe from the center to both sides (do not back and forth) until there is no dust

　　6. The ceramic roller of the small tempering furnace should be prevented from over-grinding to avoid damage to the enamel on the surface

　　7. When cleaning the porcelain, the above cleaning work must be plugged in for safety.

　　8. The porcelain roller is based on the principle of using distilled water or pure water, do not use other alkaline cleaners or chemicals

　　9. After the above cleaning treatment, the temperature of the glass tempering furnace for cars should be raised to about 200 degrees first, and then the temperature should be raised after the oven is kept for 1-2 hours.

　　The above is the rough processing method of small tempering furnace ceramic rollers organized by the editor. If you want to know more, please continue to pay attention to us.