NEWS
Learn more about Aotu dynamics and master industry information
Positon:
Homepage
>
>
>
Precautions for the operation of the tempering furnace, it is worth collecting!

Precautions for the operation of the tempering furnace, it is worth collecting!

  • Categories:Industry News
  • Author:admin
  • Origin:
  • Time of issue:2021-04-01 14:52
  • Views:

(Summary description)  The tempering furnace is mainly used for the production of tempered glass. Everyone knows that accidents may occur during the use of any mechanical equipment. At this time, you need to pay

Precautions for the operation of the tempering furnace, it is worth collecting!

(Summary description)  The tempering furnace is mainly used for the production of tempered glass. Everyone knows that accidents may occur during the use of any mechanical equipment. At this time, you need to pay

  • Categories:Industry News
  • Author:admin
  • Origin:
  • Time of issue:2021-04-01 14:52
  • Views:
Information

  The tempering furnace is mainly used for the production of tempered glass. Everyone knows that accidents may occur during the use of any mechanical equipment. At this time, you need to pay special attention. Today, I will take you to briefly understand the operation process of the tempering furnace. What precautions.

  1. Pay attention to personal safety

  1. When the equipment is working, the wind grid will automatically rise and fall. It is forbidden to extend arms and metal objects into the wind grid, otherwise serious personal and equipment incidents may occur.

  2. When the fan is working, it is forbidden to stand at the air inlet of the fan. Otherwise, when the air valve is suddenly opened, serious injury may occur.

  3. In the control cabinet, except for the switch handle, non-maintenance personnel are not allowed to touch other parts, otherwise electric shock may occur.

  4. Before turning off the main power supply for heating and heating, it is forbidden to operate and maintain the top and bottom of the furnace, otherwise severe electric shock may occur.

  5. In an emergency furnace, the operator should stay away from the filming end of the filming table, otherwise a burn may occur.

  6. Workers for loading and unloading films should pass the corresponding operation training, otherwise glass cuts may occur.

  7. Non-professional maintenance personnel are not allowed to disassemble and adjust mechanical and electrical equipment, otherwise it may cause the expansion of the problem or cause equipment and personal injury.

  8. When electric welding is performed on the tempering furnace equipment, the computer power supply, module power supply and control power supply must be turned off, and the ground wire of the electric welding machine must be placed directly on the welding parts, otherwise the computer system may be burned and the wires may catch fire.

  9. When the equipment is working, do not connect other electrical equipment such as electric fans, electric drills, hand grinders, etc. to the power supply of the control system, otherwise interference or other control system problems may occur, resulting in production losses.

  10. Useful fire extinguishers must be equipped near the tempering furnace control cabinet to prevent electrical fires, otherwise serious economic losses may occur.

  2. Special attention for tempering furnace operation

  1. When the temperature in the tempering furnace is higher than 300°C, unless it is an emergency, it is forbidden to raise the furnace body to speed up cooling, otherwise the furnace body may be deformed.

  2. During the heating process, if the glass fryer, the glass is stuck or the control system is faulty, and the cause of the fault cannot be determined in an emergency, the following emergency treatment should be done: press the inferior gate opening and closing button, press the advance release button, and investigate the glass discharge Circumstances, after the glass is discharged from the furnace, the cause of the fault can be found and the follow-up work can be handled calmly.

  3. In case of the above situation, if the glass cannot be discharged completely, the electric heating must be stopped immediately. If necessary, the furnace body shall be raised by 100mm, and the glass shall be picked out manually with hooks, etc. (be careful not to damage the quartz roller).

  The above is the main points of tempering furnace operation compiled by the editor. If you want to know more related information, please continue to pay attention to us.

Scan the QR code to read on your phone

Recommended news

What

What are the factors related to glass breakage in the tempering furnace

  When the operator is producing tempered glass, it may happen that the glass is broken in the tempering furnace. This situation is called a fryer, which is an abnormal situation in the production of tempered glass. Because the glass is broken in the tempering furnace,
2021-04-25
The

The use of various parameters of the tempering furnace

  The tempering furnace involves many parameters in the processing of ordinary glass. These parameters will affect the quality of tempered glass if you are not careful. Today,
2021-04-01
Tempering

Tempering furnace operation process

  I believe that friends who frequently operate tempering furnaces know that the process flow of tempering furnace operation directly affects the quality of glass,
2021-04-01
Precautions

Precautions for the operation of the tempering furnace, it is worth collecting!

  The tempering furnace is mainly used for the production of tempered glass. Everyone knows that accidents may occur during the use of any mechanical equipment. At this time, you need to pay
2021-04-01
Previous page
1
2
3
logo

Tel:0086-152 3616 9800     Web:www.aotuglass.cn

Add:Huimeng Town, Mengjin County, Luoyang City, Henan Province, China

Luoyang Aotu Machinery Co., Ltd.  Copyright ©  2021 All rights reserved     豫ICP备14004236号-1